wheel cylinder

The adhesive tape box body is provided with a transition wheel and a cylinder wheel with double layers.

在胶带盒主体上装有可摆动的舌头，在舌头上装一小柱状轮。

The Color Wheel The helical plate tooth threshing cylinder, the top thresh fan and the undershot fan are connected and driven by a vertical shaft.

该机以一根立轴联接螺旋板齿脱粒滚筒、上排杂风扇和下轴流风扇，并驱动其旋转。

Remove the deflector wheel at cylinder row1-4.to do this, lever off the lid and unscrew the fastening screw.

拆下气缸组1-4上的偏转轮。为此，请撬出盖子并拧下紧固螺钉。

ABS can obtain high usage of adhesion coefficient by adjusting the pressure of wheel cylinder to control the brake slip rate and it can shorten the braking distance and keep the direction controllability.

汽车ABS主要通过调节制动力来控制制动滑移率，获得较高的附着利用率，达到缩短制动距离，并且保持一定方向可操纵性的目的。

Growth of three-wheel agrimotors at home has set an even higher demand on the development of single-cylinder diesel engines, urgently calling for a new engine generation.

农用三轮车的发展，对单缸机的发展提出了更高的要求，迫切需要开发新一代单缸机.本文分析了旧卧式机的缺点.对新一代单缸机的开发进行了详细的分析论述；

Wheel cylinder piston cup

刹车储气筒活塞皮碗

By means of a simplified hydraulic brake system model, the road adhesion coefficient estimation method is discussed based on the wheel cylinder pressure.

本文在以上工作基础上，通过对液压模型的简化，讨论了基于制动轮缸压力估算路面附着系数的方法，并在实验平台上对估计方法进行了验证。

Wheel cylinder adjusting pinion shaft

轴闸储气筒调准小齿轮轴

If the external normal, they should check wheel cylinder or master cylinder failure.

若外部正常, 则应检查分泵或总泵故障.

Automatic Die-Forging for Wheel Cylinder Piston in Liquid State

液态模锻轮缸活塞的自动机

The valve lifter, a round cylinder, rides on the cam. The grinding wheel sent a shower of sparks across the workbench.

气门挺杆为一圆筒体，坐落在凸轮上。砂轮迸出的火花直落到工作台另一端。

Utilizes the cylinder ins turn the cylinder suit the rotation, Regulate circular horn wheel and the cylinder wheel girth turing round.

利用滚筒轮上滚筒套的自转，来调节圆角轮和滚筒轮的运转周长。

It adopts wheel cylinder startup and electrohydraulic multiple operation.

采用分泵启动,电液复合操纵.

Disc brake, as the name suggests, the shape is like a disc and its main parts include brake disc, wheel cylinder, brake caliper and vitta etc.

盘式制动器又称为碟式制动器，顾名思义是取其形状而得名：它的主要零部件有制动盘、分泵、制动钳、油管等。

Many Al or Mg alloy die castings, such as the auto wheel, the brake cylinder, the hydraulic valve, the actuator body and the heat exchanger, have been produced.

充氧压铸已在铝合金、镁合金压铸件的生产中得到应用，如车轮、制动器缸体、液压传动阀体以及热交换器等。

Disconnect wheel cylinder brake line.

断开分泵刹车管路.

The results provide an important experimental reference for fine-tuning and precise theoretical modelling of ABS wheel cylinder pressure.

该研究为ABS轮缸压力的精细调节和精确理论建模提供了重要的实验依据。

Hydraulic brake or weak it is unable to because of brake wheel cylinder or brake lines are caused by the residual gas.

液压制动无力或疲软这是由于制动管路或制动分泵中有残余气体造成的。

In the drum-and-shoe type, there is a wheel brake cylinder with two pistons.

在蹄一鼓制动器中，有一个带有两个活塞的制动轮缸。

Tire force was observed using tire force observer: the estimated brake wheel cylinder pressure was used to calculate brake force;

利用轮胎力观测器实现对轮胎力的观测：利用制动轮缸压力估算值计算制动器制动力；

Bullet type tank wheel cylinder piston cup

卧式圆筒形压力储罐刹车储气筒活塞皮碗

Calculation of ABS Slip Rate Based on Brake Pressure of Wheel Cylinder

基于制动轮缸压力的汽车ABS滑移率的计算

The Design of Collision Automation Brake System Based on Composite Wheel Cylinder

基于复合式制动分泵的碰撞自动制动系统设计

This paper introduced an algorithm to calculate the ABS slip rate based on the pressure of wheel cylinder and this method was verified by the experiments.

本文提出了基于制动轮缸压力的汽车ABS制动滑移率的计算方法，并且经过实验证明了其合理性。

Then, it is applied to the open circuit fault of the wheel cylinder pressure sensor, by establishing a nonlinear math model of the wheel cylinder.

通过建立轮缸非线性数学模型，针对轮缸压力传感器的断路故障进行了方法的应用。

The A 8 four-cylinder will likely be offered in front and all-wheel drive .

在奥迪A8四缸可能会提供的正面和全 轮驱动.